Designation Victoria
Bore 1  inch
Stroke 2 inch
Configuration Horizontal single cylinder mill engine
Length 15 1/2 inches
Width 6 1/2 inches
Height 7 1/8 inches
Extra equipment Drain cocks
Displacement lubricator
Governor
Taps required 2, 5, 6, 7 BA
5/32, 3/16 x 40 tpi
1/4 x 32 tpi
Notes One of the "new" range of engines that came out in the late 1970s based around a common cylinder assembly, crank and flywheel shared with the existing beam engine. Together with the James Coombes and Real, these engines have very elegant proportions and are capable, if well made, of running at very low speeds.